Audiobahn UK!

Audiobahn AS46J AS CONVERSION COMPONENTS Speaker Series. Audiobahn’s AS Series Speaker system features a removable tweeter with included mounting hardware. This allows you to position the tweeter in factory locations (if available) or to install them in a location that is more appropriate for enhanced audio imaging.
To improve upon this unique design, you can add the ASX02J 12dB 2-way passive crossover. This separates the frequencies between the tweeter and midrange speaker, improving overall sound.
Audiobahn makes available optional 20mm silk dome tweeters to further increase your system’s overall sound quality.
FEATURES

• Removable Tweeter for Remote Mounting
• Black Ice Basket
• Poly Carbon Cone
• Butyl Rubber Surround
• 2-Layer High -temp ASV Voice Coil
• Polyswitch Tweeter Protection Circuit
• Complete With Mounting Hardware

SPECIFICATION

• Size 4" x 6" 
• Magnet Weight 15 oz. 
• Power Handling 80 RMS 
• Freq. Response 60 Hz - 20 kHz 
• Sensitivity 93 dB 
• Impedance 4 Ohm 
• Mounting Depth 1 3/4"

Each Speaker Kit Includes:

• 1 SET SATIN CHROME-PLATED, 6-SPOKE GRILLES
• 1 SET CONVENTIONAL MESH GRILLES
• 1 SET REMOVABLE MYLAR TWEETERS WITH MOUNTING HARDWARE
• 1 SET REMOVABLE TWEETER CAPS

Many Thanks, Audionahn uk 

Audiobahn UK!

Audiobahn A4002V

• 2-channel car amplifier
• 100 watts RMS x 2 at 4 ohms (200 watts RMS x 2 at 2 ohms)
• 400 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
• Variable low- and high-pass filters (low-pass 50-120 Hz high-pass 50-750 Hz 18 dB/octave)
• Bass boost (18 dB at 45 Hz)
• Variable subsonic filter (20-50 Hz)
• Stereo or bridged mono output
• Cooling fan with air intake
• Built-in digital voltmeter
• MOSFET power supply
• Tri-way capable (Tri-Way Crossover required)
• Preamp- and speaker-level inputs
• Preamp outputs
• Fuse rating: 40A x 1
• 11-1/8"W x 2-3/8"H x 10-1/8"D

Many Thanks, Audiobahn

Audiobahn UK!

Audiobahn AT60J - 19mm SilkDome Tweeter. Ferro fluid Cooled and Hi-Flux neodymium magnet Flush, surface and flex mount hardware 12dB crossover with audiophile grade capacitors and polyswitch protection.

SPECIFICATION

• Impedance: 4 Ohm
• Frequency Response: 2.5kHz - 25kHz
• Power Handling: 100 Watts RMS Pair
• Sensitivity: 90dB 1W / 1M

Audiobahn UK!

Audiobahn A2200HCJ

Audiobahn A2200HCJ HIGH CURRENT Series 2 Channel Amplifiers. Audiobahn High Current amplifiers utilize an advance power supply to increase the stability of their traditional AB MOSFET circuitry. This means High Current amplifiers can operate at much lower impedances and output more power than traditional AB MOSFET amplifiers. These competition amplifiers are stable to impedances as low as 1 ohm mono which allows them to drive maximum power to any component in a vehicle’s sound system. Audiobahn also employs unregulated power supplies which implies the higher the voltage of your electrical system the more power the amplifier will produce. This makes these power-hunger amplifiers ideal for competition.
Digital meters are featured on all Audiobahn High Current amplifiers. Adding an element of control the visual indicator allows you to see the voltage of your vehicle and how much voltage the amplifier is receiving. The digital volt meter’s cobalt blue LED illumination is visible in the dark.
All Audiobahn amplifiers feature 4-way protection circuitry which is designed to defend the amplifiers from thermal overload internally-contained short circuits voltage overload and DC offset. 4-Way protection ensures that these amplifiers will continue to operate despite the “real world” mishaps that can occur in the mobile audio environment.

FEATURES

• High Current Circuitry
• PWM MOSFET Power Supply
• Double-Sided Glass Epoxy Circuit Board
• S/N Ra tio: >100dB (+/- 1dB )
• Frequency Response: 10Hz – 20kHz
• Input Sensitivity: 200mV ~ 8V
• Variable 24dB High -pas Cross over: 50Hz – 750Hz
• Variable 24dB Low-pas Cross over: 30Hz – 120Hz
• Variable Subsonic Filter: 20Hz - 45Hz
• Variable Bass Boost: 0 – 18dB
• Variable Bas Boost Frequency: 40Hz – 100Hz
• RCA Throughput Connections
• 4-way Protection Circuitry: Thermal Short Circuit Overload and DC Offset
• Dual Cooling Fans
• Digital Meter Output Response
• Cobalt Blue Illumination
• High Gloss Chrome-Plated Finish
• Nickel-plated Block Terminals

SPECIFICATION

• 4 Ohm Stereo 300 x 2 
• 2 Ohm Stereo 600 x 2
• 1 Ohm Stereo 850 x 2
• 4 Ohm Mono 500 x 1
• 2 Ohm Mono 1000 x 1 
• 1 Ohm Mono 2000 x 1 
• Height 2 1/2" 
• Width 11 15/16"
• Length 23" 

Remote Mount Bass Boost Control with Clipping Indicator
Included with all High Current Amps. 

Audiobahn UK!

Audiobahn ABC525J

Here at BassJunkies.com you will find the Audiobahn ABC525J ABC COMPONENT Series. The 3-layer silk honeycomb cone is lightweight and maintains its rigidity. Audiobahn’s use of this material adds to the speaker’s structural integrity and helps produce a cleaner, more natural sound for lower-power applications.
Audiobahn has included a tweeter attention switch which allows for increased control of your component system. This switch lets you manually adjust the brightness of your tweeters by 3dB. Additionally the two internal crossover coils are strategically mounted at 90 degree angles to eliminate signal cross-talk.
Each stamped basket component system features gold-plated binding posts. Since gold is an excellent conductor of electricity, it allows low resistance transfer from the signal cable to the speaker and simultaneously resists corrosion.FEATURES

• Multi-layer Honeycomb Cone
• Butyl Rubber Surround
• 2 Layer High - temp ASV Voice Coil
• 1" Neodymium Silk Dome Swivel Tweeter
• Surface or Flush Mount
• Crossover Network
• Component Matched 12dB Per Octave
• 4 Ohm Impedance

SPECIFICATION

• Size 5.25" 
• Magnet Weight 15 oz. 
• Power Handling 120 RMS 
• Freq. Response 35 Hz - 25 kHz 
• Sensitivity 90 dB 
• Impedance 4 Ohm 
• Mounting Depth 2 1/8"

Many Thanks, Audiobahn!

Audiobahn UK!

Audiobahn AS5OJ

Here at BassJunkies.com you will find the Audiobahn AS5OJ AS CONVERSION COMPONENTS Speaker Series. Audiobahn’s AS Series Speaker system features a removable tweeter with included mounting hardware. This allows you to position the tweeter in factory locations (if available) or to install them in a location that is more appropriate for enhanced audio imaging.
To improve upon this unique design, you can add the ASX02J 12dB 2-way passive crossover. This separates the frequencies between the tweeter and midrange speaker, improving overall sound.
Audiobahn makes available optional 20mm silk dome tweeters to further increase your system’s overall sound quality.
FEATURES

• Removable Tweeter for Remote Mounting
• Black Ice Basket
• Poly Carbon Cone
• Butyl Rubber Surround
• 2-Layer High -temp ASV Voice Coil
• Polyswitch Tweeter Protection Circuit
• Complete With Mounting Hardware

SPECIFICATION

• Size 5.25" 
• Magnet Weight 15 oz. 
• Power Handling 80 RMS 
• Freq. Response 60 Hz - 20 kHz 
• Sensitivity 93 dB 
• Impedance 4 Ohm 
• Mounting Depth 3 3/4" 

Each Speaker Kit Includes:

• 1 SET SATIN CHROME-PLATED, 6-SPOKE GRILLES
• 1 SET CONVENTIONAL MESH GRILLES
• 1 SET REMOVABLE MYLAR TWEETERS WITH MOUNTING HARDWARE
• 1 SET REMOVABLE TWEETER CAPS

Many Thanks, Audiobahn!

Audiobahn UK!

Audiobahn AT61J

The Audiobahn AT61J - 19mm Titanium Dome Tweeter. Ferro fluid Cooled and Hi-Flux neodymium magnet Flush, angle and surface mount hardware with 360? swivel function 12dB crossover with audiophile grade capacitors and polyswitch protection.


SPECIFICATION

• Impedance: 4 Ohm
• Frequency Response: 2.5kHz - 25kHz
• Power Handling: 100 Watts RMS Pair
• Sensitivity: 90dB 1W / 1M